A) without a converter/descrambler box, B) with a converter/descrambler box, Basic and cable connections – Panasonic VCR PV-M1326 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Basic and Cable Connections

Back of Combination VCR

Outdoor Antenna Connection

Unhook the antenna from your previous TV

or VCR and connect it to the back of the

Combination VCR as shown in the diagram.

If your antenna system has separate UHF

and VHF lead-ins, you need a UHFA/HF

Band Mixer (not supplied).

300-75 ohm Transformer

(not supplied)

Cable Connections

(A) Without a Converter/Descrambler Box

With this connection, you can: use your

Combination VCR remote control to select
channels for viewing and select unscrambled
channels for timer recording. Scrambled
channels may not be viewed or recorded with
this connection.

(B) With a Converter/Descrambler Box

With this connection, you may record and view
any channel including scrambled channels.

Please note, however that channel selection
must be made at the cable company converter

box. Timer recording is limited to one channel at
a time, and you can only view the channel you
are recording.

Back of Combination VCR

from CATV

(cable)

To Watch and Record Scrambled/

Unscrambled Channels

Set the Combination VCR channel
selector to the output channel of the
cable converter box (e.g. CHS).

Now, select channels to be viewed or
recorded at the cable converter box.

Advertising
This manual is related to the following products: