Panasonic VCR PV-M1326 - Manual (Page 17)

Cancel a Timer Recording:
Recording is in progress
Hold down the STOP button for a few
seconds to cancel the Tinner Recording.
• Any future daily or weekly recordings will be
performed as programmed.
Replace Program Contents:
Recording is not in progress
Push the PROG
button to display all
currently set
programs.
Push the SELECT
Up/Down and SET
buttons to select
and enter the
desired timer
recording.
(See page 16.)
P DT STRAT STOP
1 CH SPD
KUBstds]
3 10 8:00 p 9:00p 10 SP
4 SU 9:00p lOiOOp L SLP
SELECT 1-8:PUSH Al'f KEY
ENTER ; PUSH SET KEY
CANCEL :PUSH CLEAR KEY
END :PUSH PROG
KEY
START STOP CH
7|V/|^ ^SLP
SELECT START DATE
BY SELECT A/T KEY
«-PUSH CLEAR : PUSH SET
TO END PUSH PROG KEY
3 Push the SELECT Up/Down and SET
buttons to select and enter replacement
information.
4 Push the PROG button to exit this mode
and return to the normal TV screen.
Review or Clear Program Contents;
Recording is not in progress
Push the PROG
button to display
all currently set
programs.
P DT STRAT STOP CH SPD
2 8 10:00p12:00p125 SLP
3 10 8;00p 9:00p 10 SP
4 SU 9;00p10:00p L SLP
SELECT 1-8:PUSH A/T KEY
EMTER ; PUSH SET KEY
CANCEL ;PUSH CLEAR KEY
END tPUSH PROG KEY Push the SELECT
Up/Down and SET
buttons to select
the desired
program number.
Push the CLEAR
button to clear the
program.
Push the PROG button to exit this mode
and return to the normal TV screen.
P OT STRAT STOP CH SPD
□---------------;--------------__
2 B 10:00p12:00p125 SLP
3 10 8;00p 9;00p 10 SP
4 SU 9:00p10:00p L SLP
SELECT 1-8:PUSH */▼ KEY
ENTER :PUSH SET KEY
END :PUSH PROG KEY
Timer Recording
Using Unit Buttons
A timer recording can be set up using the buttons on the
Combination VCR. If necessary, the clock can also be set.
O
Hold down
RECyTIME.
and
Push FF to
enter the
program mode.
START STOP ch |
SLP I
SELECT START DATE
BY SELECT
A/¥
KEY
NEXT, PUSH SET KEY OR
TO END PUSH PROG KEY
MANUAL SET
• If the clock Is not set, pushing
these buttons will display the SET
CLOCK screen. In this case, set
the clock according to the OSD’s
instructions and then set a timer
recording.
• Once the Combination VCR is in the Program mode, the
PLAY, REG, FF, and REW buttons on the Combination
VCR operate only as specified above.
........SET CLOCK...............
SELECT
SET
END
PUSH SELECT
A/T
PUSH SET KEY
PUSH PROG KEY
or
Push REW or PLAY to
make your selection.
(for down) (for up)
Push FF to set
and move on to
the next item.
Push SET (FF) repeatedly to move to a
particular item for setting or correction.
Items to be Set:
• recording DATE
• START time
• STOP time
•CH(annel). or LINE
• SPEED (SP, LP. SLP)
When the program is completed...
O
and
Push REC/TIME
and FF to display
program contents.
(at the same time)
To set the next program,
repeat steps 2, 3, and 4 before continuing with step 5.
and
Push REC/TIME arid
FF to exit this mode.
(at the same time)
• It is not possible to clear a timer program using the Combination
VCR buttons. Please use the Remote Control.
17