Using the 100 key, Rapid tune, Audio mute – Panasonic VCR PV-M1326 User Manual
Page 9: Phones, Tv operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TV Operation
acQ
[5icheck list before you begin
□
All connections are made.
(See page 5.)
□
Your Combination VCR is plugged in.
Push POWER to turn the
Combination VCR on.
Select a channel using
CHANNEL UP/DOWN or
NUMBERED keys.
Push VOLUME UP/
DOWN to adjust the
volume level.
Using the 100 key
When selecting CATV channels 100 to 125 with the
NUMBERED keys, first push the 100 key and then enter
the remaining two digits.
For example, for channel 125:
Push the NUMBERED keys 100-2-5.
Rapid Tune
Push the R-TUNE button to display
the last channel you were watching.
Previous
channel
CH08-^
Preset
Channel
-CH10
When selecting channels with the CH Up/Down button, the channels
must be displayed for at least 4 seconds in order for the Combination
VCR to recognize them as a new selection.
Audio Mute
Push the MUTE button to instantly mute the sound.
Push again, to restore the previous sound level.
Phones
Connect an earphone (not supplied) or headphone
(not supplied) to the Phones jack.
FCC WARNING: Any unauthorized changes or modifications to
this equipment would void the user’s authority to operate.
Note to CATV System Installer
This reminder is provided to call the CATV (Cable TV) System
Installers attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.