Ddddffld, Ddddd0d – Panasonic LF-1004AB User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Terminator Setting
A terminator refers to a terminating resistance. The terminators must be set properly when SCSI units
(including the drive) have been connected to the personal computer. The factory default setting is ON.
•When the drive is connected at the terminating end:
DDDDfflD
•When the drive is connected between SCSI units:
DDDDD0D
-
25
-
Advertising