Connections, Before connecting the drive, 1) pc to pd – Panasonic LF-1004AB User Manual
Page 29: Pd/cd-rom drive
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections
Before connecting the drive
•This drive can be used horizontally only.
•Turn off the power switch for the personal computer unit and unplug the power cord from the power
socket. (Absolutely do not connect the drive while the power is on.)
• Insert the connection cables firmly.
•Attachment screw holes are located in four places on the right and left panels of the drive, and in four
places on the bottom panel. When securing the drive to a personal computer or other device, secure
the drive firmly in place with four attachment screws (included) in four places on the right and left
panels or in four places on the bottom panel.
•When connecting the internal SCSI cable (included), take care not to mistake the connected pin
numbers. Connect the internal SCSI cable so that the protrusion on the tip is on the top.
• Be sure to connect the specified power cable (see p. 37 of this manual).
• Be sure to observe all operating environment restrictions as noted on p. 34 “Specifications” of this
manual.
(1) PC to PD
Attachment
screw holes
Attachment screws (included)
SCSI host adapter
PD/CD-ROM drive
Attachment
screw holes
Personalcomputer
Attachment screws
(included) SCSI
connector
Power cable
Internal SCSI cable
(inciuded)
• If the personal computer is to be moved, make sure to turn the power to OFF and remove the PD
cartridge, CD or CD-ROM.
-
29
-