Touch pad (basic operation), Handling the touch pad, Touch pad – Panasonic CF-28 User Manual
Page 17: Basic operation)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Touch Pad
(Basic Operation)
Work Surface
Use the touch pad to move the cursor on the display and perform normal computer operations.
For instructions on how to operate, refer to
"Touch Pad (Advanced)".
^NOTE>
The touch pad has been designed to work only when a finger is used. Therefore, do not use
other implement on the touch pad.
Handling the Touch Pad
Mf a key combination such as CE
d
D + CHD is used while the pad is being touched, the
function of the key combination will not work. In addition, it is possible that control of the
cursor will be lost and the cursor will not show proper movements. In such cases, the
computer has to be restarted by using the keyboard (e.g,, ( ^ ]).
I Do not place any object on the work surface or press down forcefully with sharp-pointed
objects (e.g., nails), hard objects that can leave marks (e.g., pencils and ball point pen).
i
Do not allow things that could dirty the touch pad, such as oil. The cursor may not work
properly in such cases.
I When the touch pad becomes dirty:
Wipe to remove dirty areas by using a dry soft cloth such as gauze or a soft cloth first
applied with detergent diluted with water and then thoroughly wrung.
Do not use benzene, thinner, or disinfectant-type alcohol.
17