Microphone jack, Usb port, External display port – Panasonic CF-28 User Manual

Page 29: Parallel port, Serial port

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Microphone Jack /

Use only a monaural condenser

microphone.

Using an input source other

than a monaural condenser mi­

crophone may not allow audio
to be input or may damage the
equipment.
The settings for [Internal MIC]
of the [Main] menu in the
Setup Utility apply to both the

Internal Microphone and the

Microphone Jack.

External Keyboard/Mouse Port

USB Port

External Display Port □

Parallel Port] ^

Serial Port

Expansion Bus Connector

((3^

“Port Replicator”)

(

Reference

^

Manua)

‘USB Device”)

NOTEy

Use this connector to connect headphones or ampli­

fier-equipped speakers. Audio output from the inter­

nal speaker is disabled when headphones or external
speakers are connected.

When using a microphone (internal or external), do not remove the check mark for “Mute” under
“Microphone Balance” of the Volume Control dialog box and do not increase the playback volume.

Howling may result. Howling may occur in the same way when disconnecting an external micro­

phone. (The microphone of “Volume Control” is in the state of mute at the time of factory shipment.

This is not shown at the time of factory shipment.)

A lithium ion battery that is recyclable powers the product you
have purchased. Please call 1-800-8-BATTERY for information
on how to recycle this battery.

L’appareil que vous vous êtes procuré est alimenté par une batterie
au lithium-ion. Pour des renseignements sur le recyclage de la
batterie, veuillez composer le 1-800-8-BATTERY.

29

Advertising