Panasonic WJ-MX50 - Manual (Page 10)

I TOP VIEW 3
-------- ........
[D S. f ~i ÛÛ
/S', i 1 d T e ~ h ~ * nn
W f5 № Ù¡^0
5 o_Q S I
□ S в □ в
^ Ф. .0. 5.
- 1 _ i _
Q D Q D D n D D D
É 0
CÆO
itinn
■*■ QÛQ
:^£^0^3
i-Bassa^’ ?.(iô-?-
¡•mw^TTri ■'- '■
# (§) ®
(¿) ¿) # (@) @) ®
72. NAM Select Button (NAM)
NAM (Non Additive Mix) effect is obtained by pressing
this button and the Mix/Wipe Lever (99) is to be
positioned at center. The darker area on the B-bus
image and the A-bus image are replaced at relative
levels by the lighter areas of each other, i.e. the
stronger (lighter) images from either input replace the
weaker (darker) ones.
73. Mix Select Button (MIX)
This button is pressed to obtain a Mix Effect between
the A-bus Source Video Signal and the B - bus Source
Video Signal.
74. Wipe Select Button (WIPE)
This button is pressed to obtain a Wipe effect between
the A-bus Source Video Signal and the B-bus Source
Video Signal using the settings of the Wipe Pattern
Select Buttons.
76. Chroma Key Select Button (CHROMA KEY)
The Chroma Key effect is obtained by pressing this
button and the adjustment of the Hue Control (77) and
Slice Control (78). The B-bus signal must be the Key
signal.
77. Hue Control (HUE)
This control is used to adjust the Hue of the Chroma
Key effect.
78. Slice Control (SLICE)
This control is used to adjust the slice level of the
luminance signal for the Luminance Key effect or the
chroma signal for the Chroma Key effect.
79. Audio Follow Button (AUDIO FOLLOW)
When this button is pressed, the audio on the A-bus
and B“bus can be changed according to the relative
percentage position of the Mix/Wipe Lever (99).
75. Luminance Key Select Button (LUM KEY)
The Luminance Key effect is obtained by pressing this
button and the adjustment of the Slice Control (78). The
B - bus signal must be the key signal.
80. Video Fade Button (VIDEO)
When this button is pressed, the Wiped or Mixed video
signal will fade-in or fade-out by using the Fade Control
(95).
- 9 -