CatEye MODEL EC-1600 - Manual (Page 8)

8
1 2 3 4
ON
OFF
3. Units for body weight
• Use select switch No.3 on the back
of the control unit to choose kilo-
grams or pounds as your unit of
body weight.
NO.3-OFF ---------- kg
NO.3-ON ----------- lb
Caution: When oxygen uptake
(VO
2
max) is estimated in the
aerobic power measurement
(physical fitness test) pro-
gram, body weight in kg is
used. If you mistakenly as-
sume the unit for body, the fig-
ure given for oxygen uptake
will be wrong by a wide mar-
gin.
2. Printer use
• Use select switch No.4 on the
back of the control unit to activate
or deactivate the printer.
NO.4-OFF -- printer activated
NO.4-ON --- printer deactivated
• This switch is initially set at
"OFF" at our Factory, to activate
the printer. In order that you will
get familiar with the printer func-
tion, please leave this switch as it
is at this stage.
Note: Though you set NO.4 at
"OFF", you can temporarily
deactivate the printer by de-
pressing printer button on the
control panel. (Printing mark
on LCD panel will disap-
pear.)
When NO.4- is set at ON,
printer button
on the main
control panel does not func-
tion.
4 2
3
Installing the control unit
1. Loading backup batteries
• The battery case cover is on the
back of the control unit. You can
open the cover by sliding off.
• Load batteries (size AAA x 2) in
the battery case as shown in the
diagram. Make sure the polarity is
right, and close the case.
Note: The Model EC-1600
Cateye Ergociser™ uses bat-
teries for memory mainte-
nance so that the date in the
machine's memory is always
correct even when the main
power supply is turned off.
These batteries will last two
years under conditions of nor-
mal use. When the battery
symbol lights up on the
liquid crystal screen, replace
batteries as soon as possible. If
you keep the main power sup-
ply of the exerciser turned on
when you replace batteries,
there will be no interruption
in the machine's memory.
batteries (size AAA)
select switch
battery case cover
9
5. Installing the control unit
• Insert the cable connector from
the handlebar post into the cable
inlet on the back of the control
unit.
4. Strength evaluation table
• By using select switches No.1 and
2 in the aerobic power measure-
ment (physical fitness test) pro-
gram, you can change the internal
tables by which your strength is
judged.
• When the Model EC-1600 Cateye
Ergociser™ leaves the factory, it is
set for American use.
1-ON 2-OFF
American use
Evaluation table by AHA Com-
mittee: "Exercise testing and
training of apparently healthy in-
dividuals, A handbook for physi-
cians (1972)"
1-OFF 2-ON
European use
Evaluation table by Dr. Åstrand:
"The values from P. -O. Åstrand,
Work tests with the bicycle er-
gometer"
1-OFF 2-OFF
Japanese use
Evaluation table by Dr. Ikegami:
"Exercise prescriptions in theory
and practice"
Caution: Insert the cable con-
nector until it is firmly locked.
The control unit will not func-
tion properly with a partial or
faulty connection.
• Using the four screws provided,
mount the control unit on the
handlebar post.
pulse sensor jack
cable inlet
battery case cover
cable inlet
cable connector
screw
handlebar post
select switch