Panasonic WZ-AD96 - Manual (Page 21)

A d j u s t m e n t & S e t t i n g
P reqse L evel A djustment for AD 96
1. Press <SHIFT> button for 2 seconds or more to enter SHIFI' operation
mode.
2. Press <Level Adjust> LED Button to enter the level adjustment mode.
The LED lights in red during the mode.
3. Supply +4 dBu signal from a generator to the input connector.
4. Rotate the trimmer with a screw driver so that both the PEAK and REF
LEDs light simultaneously.
LEDs will display how the trimmer adjustment proceeds as illustrated
below.
Up the Up the Matched Down the
trimmer ^ trimmer trimmer
Down the
trimmer
t-1 fiCM
--
t-1 PtAA da
-2« —
ncF
— ^
mm ncp
---
RET
^
---
rTT-i U.
B'l
SI
^3 -42
SI
L < -1 dB -l£L<-0.1dB '0.1 < LS+0.1 dB +0.1<L<+1.0dB L>+1 dB
5. Repeat step 3 and 4 for the rest channels.
6. Press <Level Adjust> LED Button to quit the level adjustment mode.
Or, press <SHIFT> button to quit the SHIFT mode operation.
2 2