T| i – Panasonic VideoCipher II Integrated Satellite Receiver/Positioner/Descrambler CRD-4500 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
[ Т ] I EXT. ANTENNA AND TV OUT TERMINAL
• To receive an ordinary TV broadcast, turn the
receiver OFF.
• The CRD-4500R has a built-in RF modulator
with RF output (TV OUT) on either Channel 3
or 4. Unless a monitor is used, the RF output
will normally connect to the TV set.
VHF Antenna
TV
•X-
To Ant. terminal
of TV set.'
^1
[T| I
AUDIOA/IDEO OUTPUT TERMINAL
• The receiver audio out and video out terminals may be used at the same time as the RF output (TV OUT).
Note:
The audio to a monaural monitor can be connected to either the R or L audio output terminal.
[T| I
COMPOSITE OUT TERMINAL
• In case of connecting a descrambler other than VideoCipher H, connect it to the composite out terminal.