Panasonic VideoCipher II Integrated Satellite Receiver/Positioner/Descrambler CRD-4500 - Manual (Page 27)

If you don’t want password control:
1, Press I SETUP "I and S],
2. Press I ENTER~| twice when the screen prompts you to enter
a new password.
To set or change a password:
1. Press I SETUP I and 0.
2. Key in your new password (up to 8 digits) and press
I ENTER I.
(a) If the system has a password stored, you will need to key it
in and press [ ENTER~| before the system will accept a new
one. __________
© Key in the new password, and press I ENTER~1-
3. The screen will ask you to enter the new password a second
time and press I ENTER~| to confirm it.
The screen will then tell you that the password has been
changed and then return you to the main SETUP menu.
f ENTER A NEW 1
PROGRAM RATING '
PASSWORD
0-8 DIGITS
PLUS 'ENTER'
^ (PASSWORD: ) J
Г REENTER THE NEW I
PASSWORD '
FOR VERIFICATION
0-8 DIGITS
PLUS 'ENTER'
^ (PASSWORD: ' J
Program Messages
VideoCipher n program suppliers offer a wide variety of services, some of which require restrictions on viewing. When there
is a viewing restricion, you will see one of the following messages, rather than the program that is showing:
No Subscription
This message indicates that your receiver has not been authorized to receive this channel, or you have lost authorization.
Contact your program supplier to receiver or renew your authorization.
Blackout
This message indicates that a specific program is not available in your geographic area.
Program Locked Out
This message will appear if the program curretly being broadcast on that channel exceeds the rating ceiling that you have
set. You must change the rating ceiling if you want to view the program. (See Rating Ceilings and Rating Password).
Next Available Program
This VideoCipher II feature allows you to quickly check upcoming programs.
1. Turn to the VideoCipher n channel that you wish to watch.
2. Press f NEXT PRG~~l.
3. You will see a message listing the title, rating, start time and other information about the next program.
4. You may also see one of the other VideoCipher II service messages (No Subscription, Blackout, etc.)
Text Services
Some VideoCipher II channels may broadcast news bulletins, program information and other text over the channel.
To view these services:
1. Turn to a VideoCipher II channel.
2. Press rtEXTH.
3. Use the I < |/|~~>~~| to move back and forth within the text.
4. You can move to a specific page by keying in a 3-digit page number. For example, page 6 would be 006. If will usually
take several seconds before the page is displayed.
If you request a page that is not in the file (for example page 006 in a 5 page file), the screen will not change.
- -