How to tune in the stored stations – Panasonic RQ-V200 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. Tune in the station to be stored.
3. Press the memory button.
The memory indicator will flash on and off for
10 seconds.
4. During fiashing, press the memory select
button to select the memory channel num
ber (1-4).
The memory channel number will appear arid
each
time
the
memory
select
button
is
pressed, the memory channel number will
change from 1 to 4 in turn.
5. Press the memory button.
(Three beeps wilt be emitted.)
The memory indicator wilt light.
■ How to tune In the stored stations
1. Set the function selector to **RADIO”.
2. Release the hold state.
3. Select the mode (MODE1,MODE2).
4. Select the desired radio band using the
band/mode select button.
(Direct tuning)
5. Press one of the 1,2 or 3 buttons to receive
your desired station.
6. Adjust the volume using the volume con
trol.
(Memory channel tuning)
5. Press the memory select button until the
desired memory channel number appears.
6. Adjust the volume using the volume con
trol.