Troubleshooting – Panasonic DVD-ROM Drive Pack CF-VDD712 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Troubleshooting
-------------- ------------------------------- ---- -
The computer does not recognize the
DVD-ROM Drive Pack.
• Have you installed the drivers as described
in the "Software Preparation" section?
• Did you restart the computer after installing
the drivers?
• Is the DVD-ROM Drive Pack properly
mounted in the multimedia pocket?
The access lamp
((^)
does not light.
Is the disc loaded on the tray correctly?
Cannot play disc or read data from it.
Is the disc bent, scratched, or dirty?
Cannot eject disc.
Is the computer powered on?
To remove a disc when the computer is pow
ered off, insert a pointed object such as the
bent-out tip of a paper clip into the emergency
hole. Pushing it completely to the end will free
the tray so that it can be pulled out.
Emergency hole
A blue background appears on the screen
with the MPEG image.
Did you open the DVD-ROM drive or remove
the MPEG disc while it was operating?
Re-insert the MPEG disc and close the DVD-
ROM drive. Press
C Enter
)
.
The disc tray does not close.
Did you touch the eject button when you
close the tray?
10