Mounting the dvd-rom drive pack, 2 removing the device (floppy disk drive), 3 installing the device (dvd-rom drive pack) – Panasonic DVD-ROM Drive Pack CF-VDD712 User Manual
Page 6: Do not install the device upside-down
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Mounting the DVD-ROM Drive Pack
1
Power off your computer
(O’"0perating instructions" of the computer,
"Shutting Down")
Do not shut down using the suspend* or hibernation mode.
*With Windows 98, "Suspend" is called "Standby".
2
Removing the device (Floppy disk drive)
(T) Press the MP release button. The device will eject slightly.
(^Remove the device by holding both sides of the device.
MP release button
r
I Handle the device as shown (holding both sides).
Otherwise, the device may be damaged. Also, do not apply
excessive downward force on the device. The projections at
the bottom of a device become deformed.
»Be sure the shape of the lock at the bottom of a device does
not become defonned. Do not insert a device that has become
deformed into the multimedia pocket. The device may be
come impossible to remove later.
3
Installing the device (DVD-ROM Drive Pack)
Gently insert the device into the multimedia pocket
by pushing on both corners until it clicks into place.
Label side up
r
Do not install the device upside-down.
The bottom of the drive may become disfigured.
T
note
)-
You may use the floppy disk drive as an external device connected through the paral
lel port, by using an optional FDD cable (CF-VCF351).