4 power on your computer, 5 open the disc tray, 6 place a disc – Panasonic DVD-ROM Drive Pack CF-VDD712 User Manual
Page 7: Removing a diso, 7 close the disc tray
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4 Power on your computer
5
Open the disc tray
Press the eject button and slowly pull out the
tray.
6
Place a disc
Place the disc with the label facing upward in
the drive and push down until the center holder
clicks.
<Removing a diso
Place a finger on the center holder and lift up
on the edge of the disc.
Label side up
7
Close the disc tray
Close the tray without touching the eject button.
' Do not apply excessive force to the tray in the open position, doing so could diunage the tray.
I <Using PC Cards>
If the PC Card does not work, there may be no interrupt request (IRQ) line available.
Deactivate unnecessary equipment using in Setup Utility.