Panasonic OMNIVISION PV-HD1000 - Manual (Page 19)

D-VHS (Digital) Recording
NOTE: When using Panasonic Set Top BoxTu-0ST50 or TU-DST51, 0-VHS switch -
should be set to HS mode. Maximum recording Time will be 2.5 hours (DF-300 Tape)
iN^Check list before you begin.
□ All connections are made. (See pages 6~11.)
□ D-VHS VCR is plugged in.
□ Set Top Box is turned on.
1
d—^
i ! « «
PAUSE
PAUSE
Id
o © ©
0 © ©
© © ©
^ «>c«XT
© © @
. OfSPlAV MC
4
O CD O l
SPEEQ
O
-J
If “INPUT SIGNAL NOT
FOUND” is displayed on the
screen and/or “SnF" is displayed
in the Multi Function Display
during digital recording, make
sure the IEEE1394 cable is
properly connected and/or turn
the Set Top Box power ott and
then on again.
You can view only the channel
being recorded during D-VHS
recording.
Caution:
Unauthorized exchanging and/or copying of
copyrighted recordings may be copyright
infringement.
1
Insert a D-VHS cassette with
record tab.
• D-VHS VCR power comes on automatically.
2
Select a recording channel with
the Set Top Box.
• If necessary, refer to your Set Top Box manual.
3
Press CH A/W or INPUT to select “DTV” (see
page 17).
4
Slide D-VHS Switch to HS or HS/STD.
• D-VHS indicator will light.
HS: Digital recording is d -VHS Switch
peiiormed.
Tape speed is SP
(Standard Play) mode and
recording period is 2.5
hours when DF-300
tape is used.
CJEZQ
O I ANALOG
HS^TO
HS/STD: HS or STD (Standard) recording is selected
automatically.
ANALOGiAnalog recording is performed. To change the
recording speed, press SPEED (see page 34).
5
Press REC/TIME on the remote or D-VHS VCR
to start recording.
• To edit out unwanted portions, press PAUSE to
pause recording.
One Touch Timer Recording (OTR) ^
The D-VHS VCR starts recording and turns itself off at a preset time.
In step 5, press REC/TIME repeatedly to set the length
i of the recording. Each push will change the stop time.
• “TIMER" lights and the stop time is displayed in the Multi Function
Display.
NOTE: If you start the recording with recording command feature of
the Set Top Box, the One Touch Timer Recording is not
\______ available.______________ __________________________ y*
6 Press STOP on the remote or D-VHS VCR to
stop recording.
NOTE: Programs which have copy protect data cannot be recorded
and recording will be stopped. Then ‘THIS PROGRAM IS
RECORD PROHIBITION" is displayed on the screen.
When copy protected program is detcted during digital
recording, “CP"(Copy Protection) is displayed in the Multi
Function Display.
19