Panasonic OMNIVISION PV-HD1000 - Manual (Page 48)

Multi Function Display
Timer indicator
Lights when the D-VHS VCR is set for a Timer Recording,
or when a length is set for a normal recording.
The Timer Indicator flashes when a Timer Recording is set,
but a tape has not been inserted into the D-VHS VCR.
REC(ord) Indicator
Lights during recording.
STEREO Indicator
Lights when the station you are
tuned to is broadcasting stereo.
Cassette-In Indicator
Lights when a tape is
in the D-VHS VCR.
SAP Indicator
Lights when the station you are
tuned to is broadcasting SAP.
REC Level Meter
Repeat Indicator
VCR Indicator
Lights when the VCR/TV
selector is set to D-VHS VCR.
Function Indicator
Shows what the D-VHS VCR is doing.
Record
Record-pause
Playback
Slow motion or Frame advance
Play-pa use
Rewind or Rewind search
Fast forward or Fonward search
Cassette ejecting
[RECiand ►
[RÈ^and II
►
II
4 Flashing
► Flashing
II Flashing
Rear View of the D-VHS VCR
Audio Output Connector (UR)
See pages 6, 7, 26, 31.
VHF/UHF Antenna
Input Terminal
See pages 6~8,10, 26,
31.
VHF/UHF Antenna
Output Terminal
See pages 6-8,10, 26, 31T
Channel 3/4 Switch
See page 12.
Digital Interface
See pages 6, 7.
SPEED Display
Displays the recording speed.
Hi-Fi Indicator
Lights when Hi-Fi audio is
monitored or played back.
Display
• Displays the current time.
• Briefly displays D-VHS VCR status when a
function button is pressed.
• Briefly displays the channel number, or “L"
when a channel or line input is selected.
• Displays “d" when DTV is selected.
• Displays the tape counter during tape operation.
• Displays “HOLd” if an invalid key is pressed
when the VCR lock is activated.
• Displays “HS" or “STd" mode for 5 seconds when
SPEED is pressed during digital playback, or
while a digital broadcast is received when HS or
HS/STD of the D-VHS switch is selected.
• Displays “CP” (Copy Protection) when copy
protected program is detected during digital
playback or digital recording.
• Displays “ACT’ when D-VHS VCR is in menu
screen mode.
• Displays “PRG” when D-VHS VCR is in program
screen mode.
• Displays “SnF” (Signal not Found) when digital
signal is not received via IEEE1394 cable during
digital recording (see page 37).
AC Power Plug
While plugged into an AC outlet, the
D-VHS VCR consumes 8.9 W of
electrical power in OFF condition.
Audio Input Connector (UR)
See pages 6, 10, 31.
Video Input Connector
See pages 6,10, 31.
47