Jiiig with computer, Using with computer – Panasonic DMC-TZ2 User Manual

Page 38

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Gonnsciing

with/gtHer
a^yices':/;

Jiiig with computer

Connect to your computer to save, print, and e-mail your pictures.

(Using the supplied software is recommended. (P.11).)

Preparations:« Ensure that you have a sufficiently-charged battery, or an AC adaptor

attached (DIVIW-AC5PP, sold separately).

• Remove memory card if wishing to use built-in memory.

—®Turn

on

power

of both camera and computer

— —©Set to any mode except ^

(Do not move the mode dial while connected to computer.)

©Connect camera to computer

Displayed
during data
transmission.

::.i:

шшт.

{

Caution

)

USB cable
(always use cable supplied)

If using AC adaptor,

irn off camera

power before
plugging in or

removing.

•Check socket direction and insert straight in.

(Damage to socket shape can lead to faulty

operation.)

#Do not use any other USB connection cables except the supplied one.
• If using Windows 98/98SE, install USB driver software when connecting for first time.

• For more details, consult the separate ‘PC connection’ or your computer operating

manual.

• Do not disconnect the USB cable while ‘ACCESS’ is displayed.
• Turn off power and disconnect USB cable before inserting or removing memory cards.

When using USB cable with Windows 2000, use

‘ Safely

Remove Hardware’

application in task tray

before inserting

card.

• If the battery display flashes red, cancel the connection from your computer, and

disconnect the USB cable. (Recharge the battery before reconnecting.)

• To play motion pictures on your computer

®Use the ‘QuickTime’ software on the supplied CD-ROM.

(Installed as standard on Macintosh)
If using Windows 98/98SE/Me, download and install ‘QuickTime 6.5.2 for PC’ from the

following website, http://www.apple.com/support/quickfime/

•Save motion pictures to your computer before viewing.

• Only built-in memory can be accessed if connecting in CLIPBOARD mode.

Windows

Drives are displayed in ‘My Computer’ folder.

Macintosh

Drives are displayed on the desktop.
(Displayed as ‘LUMiX’, ‘NO_NAME’, or ‘Untitled’.

■ Folder structure

Bull-iii ncn

I D.C1M::| (Stiil/motion pictures)

-100_PANA (Up to 999 pictures/folder)

-P1000001.JPG

I

П___ i

@ ®

-P1000002.JPG

-P1000999.JPG

-101_PANA

-999_PANA

)

м

1-З

у

П(РРОР flies)

'— ••pRivATEI-j {clipboard pictures, P.58)

-MEM00001.JPG

# Folder no.
i'Jf' File no.

Fi! JPG: Still pictures MOV: Motion pictures

• To reset file or folder numbers:

■NO. RESET’ (P.22)

• New folders are created in the

following cases:

*When pictures are taken

to folders containing files

numbered 999.

•When using cards already

containing the same folder

number (including pictures taken
with other cameras, etc)

•When recording after performing

NO. RESET (P.22)

• File may not be able to be played

back on camera after changing
file name.
(Number can be changed without

changing number of digits.)

■Connecting with

FTP

(Picture Transfer Protocol)

if using Windows XP or Mac OS X, you can connect to your computer in PTP mode by
setting to PRINT mode

• Pictures can only be read on computer from camera.
• It may not be possible to read if there are 1000 or more pictures on the card.

• The message (PLEASE RE-CONNECT TFiE PRINTER.) will be displayed if you set

to Cl after connecting to your computer. Set the mode dial to a different mode, and
reconnect the camera after ‘ACCESS’ disappears.

74

VQT1B61

VQT1B61

75

Advertising