Ireen – Panasonic DMC-TZ2 User Manual

Page 40

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

GG-ftneciitig

wilH pthéf '

àsyicei; : :

P

iiriQ fContinyed)

IPrint settings

PRINT WITH DATE

OFF/ON

NUM. 0= PRINTS

Set number of pictures

^

(printer takes priority)

L/3.5”x5”

(89 X 127 mm)

2L/5”«7”

(127 X 178 mm)

POSTCARD

(100 X 148 mm)

PAPER SIZE

A4

(210 X 297 mm)

CARD SIZE

(54 X 85.6 mm)

10x15cm

(100 X 150 mm)

4”x6”

(101.6 X 152.4 mm)

8”x10”

(203.2 X 254 mm)

LETTER

(216 X 279.4 mm)

A (printer takes priority)

/

FI (1 picture,

no

border)

/

PAGE LAYOUT

|E1| (1

picture,

with

border) /

fflffl (2 pictures)

/

gg (4

pictures)

• Items may not be selected if incompatible with printer.
• To print to paper sizes/layouts not supported by this camera, set to ^ and make

settings on the printer.

(Consult your printer’s operating manual.)

e.g. To print the same picture 4 times on 1 sheet

Layout setting: gg (4 screens) Print copies: 4

(Setting print copies to 1 will print 4 different pictures.)

• Date printing

«If printing in shop: Make DPOF settings (P.68) and request printing ‘with dates’.
»If using printer: Make DPOF settings (P.68) and use a printer compatible with date

printing.

«If using the supplied software: Set to ‘with dates’ in the print settings.

«Use the supplied software to print age for ‘BABY’ (P.42) or ‘PET’ (P.44) scene modes,

or days elapsed in ‘TRAVEL DATE’ (P.48). (These cannot be requested in shops.)

«Even if DPOF settings are made, dates may not be printed with some shops or

printers.

«Settings on the actual printer may be prioritized in some cases. Check the date

printing settings on your printer.

«Do not set date printing on pictures onto which ‘DATE STAMP’ (P.66) is applied.

othePA/ise date will be printed twice.

Connecting

with other
devices

ireen

You can view pictures on a TV screen by connecting your camera to your TV with the

supplied AV cable.

Preparations:# Turn off both camera and TV.

• Set the TV aspect (P.22).

3)Connect camera to TV

C2)Turn on TV

#Set to auxiliary input.

If your.iy

.haB

iaiiiSD mérriòry card slot,;you cart

yfew .s’titj ptctufes by.

inserting a card clirèctiy.

Psctùfesmay riot beyiewabterfronisoiTie'.

.■ .MiiltfMediaCards..- .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■

C

Note )

#Do not use any other AV cables except the supplied one.
• You can view pictures on TVs in other countries (regions) which use the NTSC or PAL

system when you set ‘VÌDEO OUT’ in SETUP menu. Even if you set ‘VIDEO OUT’ to
‘PAL’, the output signal will still be NTSC in the recording mode.

»Some televisions may cut off the edges of pictures, or not display them full screen.

Pictures rotated to portrait may be blurred slightly.

• Change picture mode settings on TV if aspect ratios are not displayed correctly on

widescreen or high-definition televisions.

• Also consult TV operating manual.
#!f problems such as picture flickering occur, set VIDEO OUT’ (P.22) to ‘NTSC’.

78

VQT1B61

VQT1B61

79

Advertising