Panasonic DMC-TZ2 - Manual (Page 42)

Meanings of and required responses to major messages displayed on LCD monitor.
THIS MEMORY CARD IS LOCKED
• Release using the write-protect switch on the SD memory card or SDHC memory
card. (P.26)
NO VALID PICTURE TO PLAY .... ........................................ . . .
•Take pictures, or insert a different card already containing pictures.
THIS PICTURE IS PROTECTED ...: , ... t
• Release the protection before deleting, etc. (P.69)
SOME PICTURES CANNOT BE DELETED/THIS PICTURE CANNOT BE DELETED
• Non-DCF images (P.90) cannot be deleted.
..> Save all necessary data to computer (or other device), and ‘FORMAT’ (P.73) card
to delete.
NO ADDITIONAL DELETE SELECTIONS CAN BE MADE
#The number of pictures that can be deleted at once has been exceeded.
• More than 999 pictures have been set as ‘FAVORITE’.
»The number of pictures than can be date stamped at once has been exceeded.
CANNOT BE SET ON THIS PICTURE : :
»DPOF settings cannot be made for non-DCF images (P.90).
PLEASE TURN CAMERA OFF AND THEN ON AGAIN : : r ............................ :
• Force has been applied to lens (or other component) and camera could not operate
correctly.
" •» Turn on power again.
(Consult the dealer or your nearest Service Center if display still remains)
SOME PICTURES CANNOT BE COPIED/COPY COULD NOT BE COMPLETED
• Pictures cannot be copied in following cases.
»Picture of same name already exists in copy destination.
»File is not of DCF standard (P.90).
•Picture taken or edited on a different device.
BUILT-IN MEMORY ERROR FORMAT BUILT-IN MEMORY?
• Displayed when formatting built-in memory via computer, etc.
> Reformat directly using camera (P.73).
MEMORY CARD ERROR FORMAT THIS CARD? ..................
©Format cannot be recognized on this camera.
> Save all necessary data to computer (or other device), and ‘FORMAT’ (P.73).
MEMORY CARD ERROR PLEASE CHECK THE CARD............. ■ ..........
•Access to card has failed.
Insert card again.
MEMORY CARD ERROR MEMORY CARD PARAMETER ERROR
•Card is not of SD standard. Only SDHC memory cards can be used for capacities of
4GB or greater.
READ ERROR PLEASE CHECK THE CARD ...............................
• Data read has failed.
Check whether card has been inserted correctly (P.15).
WRITE ERROR PLEASE CHECK THE CARD
• Data write has failed.
^ Turn off power and remove card, before re-inserting and turning on power again.
• Card may possibly be damaged.
MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE :
WRITING'SFEED OF THE CARD ................. ....... . .................... ................................................... .
• If ‘PICT.MODE’ is set to ‘30fps VGA’ or ‘30fps 16:9’, use a card of at least 10 MB/s (as
marked on packaging, etc). (P.47)
• Motion picture recording may be automatically terminated with certain cards.
A FOLDER CANNOT BE CREATED ........................................................ ............. .......
• Folder numbers in use have reached 999 (P.75).
-+ Save all necessary data to computer (or other device), and ‘FORMAT’ (P.73).
Folder number is reset to 100 when performing ‘NO.RESET’ (P.22).
PICTURE IS DISPLAYED FOR 4;3 TV/PICTURE IS DISPLAYED FOR 16:9 TV
•AV cable is connected to camera.
»To remove message immediately > Press ‘MENU/SET’.
•To change aspect ratio ^ Change ‘TV ASPECT’ (P.22).
• USB cable is only connected to camera.
^ Message disappears when cable is also connected to another device (P.74, 76).
82
VQT1B61 VQT1B61
83