Troubleshooting guide, Before calling – Panasonic RQ-SW09V User Manual

Page 2

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

■ Using the headphones

(D Press on the base of the clip to

open it.

Press

Fit the clip from behind so the

upper hook comes slightly over

the ear and the lower hook fits

just behind the ear lobe.

Troubleshooting Guide

INSTALL A BATTERY.

One R6/LR6, AA, UM-3
(not included) battery

BATTERY CONDITION

In the stop mode

I

1

CHANGING

" ^ THE BASS

While playing a
tape or

FM radio

wth selector to
[MAIN] O

1—>“VMSS”--------- 1

L“ "(OFF)<J

ЗеЪге requesting service for this unit, check the chart for a possible cause of the
згоЫет you are experiencing. Some simple checks or a minor adjustment on your
)art may eliminate the problem and restore proper operation,

f you are in doubt about some of the check points, or if the remedies indicated in the

:hart do not solve the problem, refer to the directory of Authorized Service Centers

enclosed with this unit) to locate a convenient service center, or consult your dealer

or instructions.

Рог

detailed instructions, contact an authorized servicenter 1-800-211~7262 or

web site (http://www.panasonlc.com}.

BEFORE

CALLING

PROBLEM

CHECKPOINT

Radio operates but tape doesn’t.

Is the battery worn?

No operations.

• Is the unit in the hold state?

• Has thè battery been installed with its polarities (©, ©)

reversed?

•No sounds.

•VMSS does not function.
•A gritty noise is heard.

•Is the headphone plug firmly connected to the Q jack?
• Is the plug dirty?

VMSS is not working very well.

Is the volume down too low? (The VMSS system functions

better when the volume is at a higher level.)

Cannot hear mustc-too noisy.

Separate the unit from mobile phones.

Advertising