Panasonic DVD-A350A - Manual (Page 12)

Optional audio connections
CoiHiecting to an AV amplifier with S.ich input connectors supporting Dolby Digital
This player contains a Dolby Digital (AC-3) decoder or MPEG 2 decoder. This enables the playback of DVDs recorded in Dolby
Digital, MPEG 1/2 audio or Linear PCM without the need for an external decoder with Dolby Digital, MPEG 1/2 audio or Linear PCM
processing. When the player is connected to an AV amplifier with 5,1ch input connectors, you can enjoy theater-quality audio in your
home when playing discs recorded in Dolby Digital, MPEG 1/2 audio or Linear PCM.
AV Amplifier with
S.ich input connectors
(All sold separately.)
Front speaker (Left)
Subwoofer (Left)---------
Surround speaker (Left) —
Center speaker
— Front speaker (Right)
----- Subwoofer (Right)
Surround speaker (Right)
Notes:
•After connection is made, set the “Speaker setting" (such as
Yes/No and Large/Smatl) according to your speaker sys­
tem. (See page 39.)
•if the type of the speakers connected does not satisfy the
channels recorded in an MPEG 2 or Linear PCM disc, the
disc will not be played in all the channels but only in 2 chan­
nels. (For example, even if the front speakers and the cen­
ter speaker are connected, a disc recorded in 5 channels
will be played back only in 2 channels.)
•DVDs recorded in Linear PCM/96 kHz sampling in which
“Center Speaker” is contained will also be played back only
in 2ch.
• If the surround speakers or the center speaker can’t be In­
stalled at an equal distance to (or further away from) the
front speakers from the listening position, then change the
delay time setting at the “Speaker setting" on page 39, to
compensate.
•Set VIRTUAL SURROUND SOUND (V.S.S.) to “VSS OFF
(Cancel) when using speakers other than the front speakers
[UR). If it is set to “VSS 1” (Natural effect) or “VSS 2" (Em­
phasized effect), sound will be delivered only through the
front speakers (UR).