4 select “exit” by the joystick and press select – Panasonic DVD-A350A User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Initial settings
4
Select “Exit” by the joystick and press
SELECT,
Setting is
SELECT,
ting is finished and the initial settings screen is displayed.
Note:
•The "Large/Smali" setting has no effect on DVDs recorded
in MPEG 2 audio.
For your reference:
•To output the test signal
1. Select “Test" by the joystick, and then press SELECT.
(Test signals will be output consecutively from each
speaker clockwise;)
2 .
Select the appropriate volume (-6 dB through +6 dB) by
the joystick while the test signal is being output from the
speaker.
3. Press SELECT. (The test signals are stopped.)
Also refer to “Common procedures of initiaf settings” on