Panasonic DVD-A350A - Manual (Page 32)

Initial settings
Once the intial settings have been completed, the player can
always be operated under the same conditions (especially
with DVD discs).
The settings will be retained in the memory even after switch­
ing the power to the standby mode until the settings are
changed.
Common procedures of initial settings
1
Press SETUP in the stop mode.
1 Disc Languages
2 Ratings Level S i'
' Language . English
: 4 dn-Scieen Messages On
FLpspiay
§S$.^^j^Oigjiii Audio Out^^
Bright
4;3:
Speaker 'Serttihg'
(-^her Settings-^
<.OExit
>HilWllW**llll*»'W
2
Tilt the joystick to the
A/T
direction to se­
lect the preferred item and SELECT.
Each screen for setting the value is displayed.
1 Disc Languages (see page 33)
2 Ratings (see page 34)
3 Menu Language (see page 35)
4 On-Screen Messages (see page 36)
5 FL Display (see page 36)
6 TV Aspect (see page 37)
7 Digital Audio Output (see page 38)
8 Speaker Setting (see page 39)
9 Other Settings (see page 41)
3
Tift the joystick to the
A/T
direction to se­
lect the preferred value and press SELECT.
•Some items require additional steps. (See the respec­
tive page.)
Setting is finished and the initial settings screen is displayed.
To cancel during setup operation
Press RETURN or select “0”. (The previous screen is dis­
played.)
To clear the initial settings screen
Tilt the joystick to the A/T direction to select “0” and press
SELECT. (Pressing SETUP or RETURN also clears the initial
settings screen.)
For your reference;
•The numeric buttons can also be used for selecting items or
values instead of the joystick; in this case, pressing
SELECT is not necessary.
..................... - ' ■ ■■ i----------- ..--V ■........