Panasonic DVD-A350A - Manual (Page 42)

Operating the TV set by the
remote control unit
Preparations
Press the numeric buttons while pressing the
POWER button for the DVD/VIDEO CD/CD
player to enter the manufacturer’s code of
your TV set.
•Be sure to enter the manufacturer’s code in 2-digit.
Code Manufacturer Code Manufacturer
01 1 PANASONIC/
National
11 SHARP
02 2 PANASONIC/
National
12 PHILIPS,
SAMSUNG
03 3 PANASONIC/
National 13 NEC
04 4 PANASONIC/
National 14 SANYO
05 SONY 15 GOLDSTAR
06 TOSHIBA 16 GOLDSTAR
07 JVC 17 SAMSUNG
08 HITACHI 18 SAMSUNG
09 MITSUBISHI 19 SANYO
10 MITSUBISHI
Note:
•For TV sets with two manufacturer’s codes (such as
PANASONIC), try both codes to confirm which code is ef­
fective.
•When the batteries of the remote control unit are replaced,
perform the above operation again.
Operation^
Press
OFF. POWER to turn the TV set ON or
Press EQ AV to select the TV input source.
Press
ED
CH.
a / v
to select the channel.
A: To increase the channel no.
V: To decrease the channel no.
Press
ED
VOL +/~ to turn the volume up or
down.
-I-; To increase the volume
To decrease the volume
Note:
•Not all TV models and brands can be operated with the uni­
versal remote control supplied.