Function – Panasonic KXL-783M User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If you move the cursor to the Menu bar item “Player” while the CDT Remote Panel is
displayed, the following commands will appear. The functions of each command are
shown in the table below.
Player
Select Device
M
D
Show Fewer Controls 38 K
Transfer Digital Audio... 38 T
Play an AIFF file...
38 P
Play Only Chosen Track
No.
Function
If you have more than one CD-ROM drive, CDT Remote automatically picks the
drive with the lowest SCSI ID number. You can select another drive by choosing
Select Device from the CDT Remote menu.
If you prefer to have CDT Remote take up less room on your screen, you can
choose Show Fewer Controls and the CDT Remote window will shrink to less
than half the size while still keeping the most important control buttons. Your
selection will be saved, so the next time you run CDT Remote it will display the
preferred size.
О
This function is not supported.
Playback of AIFF files at 16 bit quality, when possible, is also supported. The
playback will function in the background, while you work, and will give much
better performance than tools such as Apple’s MoviePlayer 2.0. This menu item
will not be displayed if QuickTime 1.6 or later, or Sound Manager 3.0 is not
present.
This command will restrict CDT Remote to playing only the track that is currently
displayed in the Elapsed Time Window.
24