Setting, Scsi id number, Terminator – Panasonic KXL-783M User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ SCSI ID number:
Each SCSI device connected to your Macintosh can be assigned an individual ID number
(refer to the respective manuals). Be sure that the CD-ROM SCSI ID number is not same
as another SCSI device connected to the Macintosh.
The factory setting of the player's SCSI ID number is set to 5.
■ Terminator:
The factory setting is
ON.
ON:
When the player is connected to the Macintosh
(m'
P. 19).
If SCSI devices are connected, set their terminators to OFF.
OFF:
When using independently as an audio CD player (power consumption can be
saved) (
et
P. 17).
CO
o
CO
3
cr
o
Q)
3
a
H
(0
3
0) 0)
o 3
CO§
o
g
3-3
3 s
(Q 2.
Setting
Make sure that the player is off.
Set the SCSI ID number switch (1—3) or Terminator switch (4) ON/OFF by using a pointed
object like a pen (do not use a pencil), and referring to the table below (for SCSI ID
number).
(For SCSI ID number setting)
Example:
SCSI ID number=5
Terminator=ON
SCSI ID
number
SCSI ID number
switch
1
2
3
0
OFF
OFF
OFF
1
ON
OFF
OFF
2
OFF
ON
OFF
3
ON
ON
OFF
4
OFF
OFF
ON
5
ON
OFF
ON
6
OFF
ON
ON
7X=
ON
ON
ON
I
I : Factory setting
* Do not use “7" for player’s SCSI ID
number, since it is used for the
Macintosh.
gy