Panasonic GP-US532H - Manual (Page 17)

When you select AUTO, the gain of the amplifier
changes as follows.
Position Gain
HIGH Maximum +18 dB
LOW Maximum +9 dB
OFF OdB
When you select MANU, the gain of the amplifier
changes as follows.
Position Gain
HIGH + 18 dB (Fixed)
LOW +9 dB (Fixed)
OFF OdB
6. Synchronization Setting (SYNC)
This model accepts the VBS signal (color compos­
ite video or blackburst signal) and VS signal (BA^
composite video or composite sync signal ) for the
gen-lock operation.
This camera also accepts the vertical drive pulse
(VD) with horizontal drive pulse (HD), and the verti­
cal drive pulse (VD) only.
• The VS gen-lock mode has its own menu for hori­
zontal and subcarrier phase adjustaments. When
the cable length of the video output or the gen-lock
input is changed, the horizontal phase must be re­
adjusted.
• When the HD/VD or VD pulse is to be used, supply
them to the VBS/HD connector and the VD connec­
tor on the rear panel of the camera control unit.
6-1. Internal Sync Mode (INT)
RGB Sync Output Level Adjustment (RGB SYNC)
1. Move the cursor to the SYNC parameter,
2. Press the PAGE button. The SYNC menu appears
on the monitor screen.
3. Move the cursor to the RGB SYNC parameter.
4. Select 4.0V or 0.3V according to the RGB monitor
input level.
** SET UP **
1.
CAMERA ID *OFF 2.
FLD/FRM FLD
ELC *OFF
SHUTTER OFF
GAIN AUTO 3,
SYNC ¿INTj
BLACK BAL ABC
SCENE FILE *SCENE1
END
J
6-2. VBS Gen-lock Mode (EXT(VBS))
Move the cursor to the SYNC parameter.
Connect the coaxial cable for the blackburst or
composite color video signal to the gen-lock input
connector.
Confirm that the INT parameter changed to
EXT(VBS) on the menu.
Caution: The gen-lock input signal should meet the
EIA RS-170A specifications and should not
contain jitter, such as a VCR playback signal,
as it could disturb synchronization.
Imporant Notices:
• The priority for the sync mode is as follows:
1. Color composite video signal (VBS)
2. BAA/composite video signal (VS)
3. HD/VD signal
4. VD signal
5. Internal sync (INT)
• When the internal sync (INT) mode is to be used,
no gen-lock input signal should be supplied to the
gen-lock input connector on the rear panel of the
camera contrrol unit.
• When the VBS or VS gen-lock mode is to be used,
supply the gen-lock input signal to the gen-lock
input connector on the rear panel of the camera
control unit.
• The VBS gen-lock mode has its own menu for hori­
zontal and subcarrier phase adjustments. When the
cable length of the video output or the gen-lock
input is changed, horizontal and subcarrier phase
must be re-adjustable.
** SET UP **
CAMERA I D •OFF
FLD/FRM FLD
ELC ♦OFF
SHUTTER OFF
GAIN AUTO
SYNC r*EXT(VBS)
BLACK BAL ABC
SCENE FILE ♦SCENEl
END
>
-
15
-