Lens mount, Camera cable connector, Camera mounting screw hole – Panasonic GP-US532H User Manual
Page 5: Front panel, Power on/off switch (dc power on/off), Power indicator (power), Major operating controls and their functions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
Camera Head
1. Lens Mount
This is used to attach the special C-mount lens for
GP-US522 and the C-mount lens for GP-US532.
2. Camera Cable Connector
This 24-pin connector is used to connect the
optional camera cable GP-CA522/4 to the camera
control unit.
3. Camera Mounting Screw Hole
This hole (1/4" - 20) is used to mount the camera
onto a mounting bracket.
Camera Control Unit
[Front Panel]
4. Power ON/OFF Switch (DC POWER ON/OFF)
This switch turns the power of this unit and power
supply for the camera head on or off.
5. Power Indicator (POWER)
This indicator lights up red when the power switch
is turned on.
6. Automatic/Manual Gain Selector Switch
(GAIN HIGH/LOW/OFF)
This selector is used to select the gain of video
amplifier as follows.
The mode can be selected in the SET UP menu.
Refer to page 14.
MODE
POSITION OF SW
GAIN
AUTO
HIGH
Maximum +18 dB
LOW
Maximum + 9 dB
OFF
OdB
MANU
HIGH
+ 18 dB (Fixed)
LOW
+9 dB (Fixed)
OFF
OdB
-
3
-