Infrared wireless stereo headphones, Installation examples, Cautions for the liquid crystal panel – Panasonic CY VMX6800U User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

□ Infrared Wireless Stereo

Headphones

o There may be breaks in the sound or noise may

be heard if the headphones are used at a dis­

tance from this unit (display) or if obstructions

block the infrared rays. These problems are
caused by characteristics which are inherent to
infrared rays, and thus are not indicative of any
malfunctioning.

® Make sure that the infrared sensor window is

not covered by your hands or hair.

o Since these headphones use infrared rays for

operation, avoid using them in direct sunlight.

© Avoid using these headphones in the following

location since they can cause malfunctioning.

•Very hot places near heating appliances, etc.

0

Do not drop these headphones or otherwise

subject them to strong impact.

o Do not expose these headphones to the rain or

water. Doing so may cause malfunctioning.

Precautions for listening with the headphones

© Do not play your headphones at a high volume.

Hearing experts advise against continuous

extended play.

o If you experience a ringing in your ears, reduce

volume or discontinue use.

□ Installation Examples

□ Cautions for the Liquid Crystal

Panel

o Do not leave the liquid crystal panel surface facing

upwards.
Storage temperature range: - 4 ® F t o 176 ®F

(-20‘’C to 80 ®C)

When the liquid crystal panel reaches high tem­

peratures or low temperatures, chemical changes

occur within the liquid crystal panel which may
cause malfunctions.

o Do not strongly impact the liquid crystal panel.

o When the temperature is very cold or very hot, the

image may not appear clearly or may move slow­
ly. Also, movement of the image may seem to be
out of synchronization or the image quality may

decline in such environments. Note that this is not
a malfunction or problem.

Usage temperature range: 32 ®F to 104 ®F

(0 “C to 40 “C)

©There may be red spots, blue spots and green

spots on the panel surface. This is a characteristic
of liquid crystal panels and is not a problem. The
liquid crystal panel is built with very high precision

technology and has at least 99.99 % effective

image pixels. Be aware that on 0.01 % of the panel

there may be missing pixels or constantly light

pixels.

Spots

g

b

0

©

WARNING:

The driver must not operate the color LCD monitor. Operating the color LCD monitor may lead to distrac­

tion and cause an accident. Stop your car in a safe location when operating the unit.

Advertising