Access to components, Gigabit ethernet indicators, Opening the front panel – 360 Systems MAXX-2420EX User Manual
Page 116: Removing the top cover
Page 116
MAXX-2420-EX Owner’s Manual
Gigabit Ethernet Indicators
The Gigabit Network Port card has the following indicator lights:
Label
Indication
Meaning
Green on
The port is connected to a valid link partner
Green flashing
Data activity
ACT/LNK
(Left)
Off No
link
Off 10
Mb/sec
Green 100
Mb/sec
10=OFF
100=GREEN
1000=YELLOW
(Right)
Yellow 1000
Mb/sec
Access To Components
Be certain to shut down the server and disconnect the power cord before
opening the unit for service.
The following sections provide instruction on disassembly and re-assembly for maintenance.
Opening the Front Panel
The front panel is easily opened for access to the eight disk drives. Using a coin or a flat-blade
screwdriver, unscrew the two large panel fasteners on the left and right sides of the front panel.
Pull outward to remove cover.
To re-install the front panel, verify that all wires are within the chassis, then place the front
panel into position and tighten the front panel access screws just enough to be snug.
Removing the Top Cover
Use a No. 2 Philips head screwdriver to remove the 13 screws attaching the top cover, and
then lift it off.