360 Systems MAXX-2420EX - Manual (Page 19)

MAXX-2420-EX Owner’s Manual Page 19
Installation
Unpacking
Your server has been carefully inspected and calibrated before shipment to allow immediate
operation upon installation. Check all items for signs of visible damage which may have
occurred during shipment. If any item is damaged, contact the carrier to file a claim.
Keep the packing materials in the event that a unit must be returned. If the original packaging
is not available, due to the product’s weight it should be professionally packed for shipment,
with particular attention to protecting the corners.
Package Contents
Confirm that all items on the packing list have been received. Contact 360 Systems if any item
is missing.
9 MAXX-2420-EX server
9 Keyboard
9 2-Button Scroll Mouse.
9 USB flash drive containing backup copy of software and utilities.
9 CXP serial control and GPI module
9 CXP interface cable
9 Rack Mount Hardware Kit
9 Operations Manual and Warranty Card
9 Power cords (2)
The server is not shipped with a video monitor. Select a VESA-compliant CRT or LCD monitor
with a minimum refresh rate of 75 Hz.
If you own more than one server, it may be appropriate to use a single keyboard, monitor, and
mouse with a KVM switch to select between servers. Not all KVM switching systems are
compatible. The KVM switch must supply an active signal to the server at all times, even when
switched away from it. When first powering up the server, use only the supplied keyboard and
mouse directly connected. Then thoroughly test the KVM switch system that will be used
before installation is completed. NOTE: If the mouse and keyboard connections are
interchanged, the server may not start up properly. Be especially cautious when using
extender cables.