360 Systems Image Server 2000 - Manual (Page 30)

Page 30 Image Server 2000 Owner’s Manual
Windows Menu
Choices in this menu change the way the windows are displayed. Use the CTRL+TAB key
combination to change the active window in rotation, or use the mouse to activate the desired
window.
Cascade
Arranges all open windows so that they are overlapping, but offset. It is useful as a starting
point to rearrange the windows. This choice is especially useful with small monitors.
Tile
Arranges all open windows so that each is fully visible at the same time. This choice is
especially useful with larger monitors. In case the Windows don’t tile as expected, select
Cascade to restore their original size and order, then select Tile.
In addition, there are selections for each open transport window. Selecting one of these brings that
transport to the top of the display and makes it the active window.
Help Menu
Contains a single item, About, which displays the Image Server software versions, serial number and
Unit ID.
The Status Bar
A status bar appears at the bottom of the window that provides system information to the user
including
GENLOCK , INPUT VIDEO DETECTED , and TIME REMAINING — PERCENT FULL . Messages such as
CONNECTED TO HOST or CONNECTION TO HOST REFUSED are also displayed as diagnostics. Error and
status messages from the RAID system can also be displayed here.
Channel 1 is the only channel that can either Record or Play video content. Channels 2 and 3 can
play back content. All channels may be used at the same time.
Each channel can be controlled in two different views.
1. The Transport View
2. The Playlist View