Acoustica Mixcraft 7 - Manual (Page 57)

51
MAPPING A HARDWARE CONTROL TO A PLUG-IN EFFECT PARAMETER
In this example we’ll assume that an effect has already been inserted into the channel.
1. Click the FX button in the channel header, then click the Edit button to the right
of the effect name.
2. Click the gear in the upper left corner of the plug-in interface window to open the
MIDI Mapping window.
Alternatively, the MIDI Mapping window can be accessed by displaying
a channel’s lane automation (press the automation button).
… then clicking the automation parameter (in this case, Track Volume).
When the drop-down menu opens, choose MIDI Map.
3. Under the Parameter heading, click <Add New> to view the automatable parameters
for the current effect or Virtual Instrument. Choose a parameter and click to select it.