Aviom A360 - Manual (Page 40)

31 A360 P ersonAl
M
ixer
U
ser
G
Uide
Stereo Links and Groups
The following rules apply when using Pro16 mode and working with stereo channels in Groups.
Turning a stereo link on when only one channel of the new stereo pair is in a Group will •
cause the companion channel to be added to the Group.
When a stereo link is turned on while the channel pair is split between two Groups, the
•
right (even) channel will be removed from its Group and added to the Group containing
the left (odd) channel of the stereo pair.
When a Group contains only two channels
• and those channels are an adjacent odd-even
pair, turning on the stereo link at the input device will cause those channels to become a
single stereo mix channel on the A360; the Group is cleared.
If a stereo link is activated causing a channel to be removed from a Group so that it leaves
•
a single channel in the old Group, that Group will be cleared since a Group requires two or
more channels.
If channels in a Group are removed so that only one channel (mono or stereo) remains in
•
the Group, that Group is eliminated; the channel will behave normally.
Trim All Function
The Trim All function is an easy way to turn down the volume of all 16 channels in a mix by a uniform
amount with a single command. Use Trim All to clean up a mix if the red Digital Signal/Limit LED is lit solid,
or if a channel being edited is already at its maximum level and you want to continue to raise its volume
relative to the other elements in the current mix.
To use Trim All, simultaneously press the m
ute
and G
rouP
buttons. Each press of this button combination
lowers all channel volumes (including the Ambience channel) by 3dB. Trim All is not available if a channel
is in Solo.
Press Mute plus Group to trim all channel volumes by 3dB.
Once the mix has been trimmed the desired amount, you can continue making mix adjustments as needed;
save the mix as a preset to retain the changes.