Aviom A360 - Manual (Page 47)

38 A360 P ersonAl
M
ixer
U
ser
G
Uide
Saving Mix Presets
The A360 Personal Mixer can save up to 20 Mix Presets—16 are stored using the channel select buttons
numbered 1-16 as storage locations while an additional four can be saved in the Instant Mix Recall™
locations A-D. Mixes are retained in the A360 even when the mixer is powered down.
When a Mix Preset is created, the A360 stores the channel-level settings for the 16 standard mix channels
and the Dual Profile Channel, plus the level setting for the One-Touch Ambience button. See page 42 for a
complete list of what does and does not get saved in a preset.
All 20 Mix Presets in the A360 can be backed up to a PC or copied to another A360 by saving the A360’s
configuration to a USB memory stick in Program mode. See page 51 for information on saving to USB.
P N
ote
: It is important to remember that the position of the rear-panel mode switch and the type of
A-Net data (original 16-channel maximum Pro16 or enhanced 64-channel maximum Pro16e)
that is in use when Mix Presets are created will have an impact on presets. This is because
the two types of A-Net use different channel mapping schemes and treat stereo channels
differently. Pro16 Mix Presets cannot be used in Pro16e mode and vise-versa. The Recall
button and the mix storage location’s button will blink as an error warning if a mix cannot be
recalled.
Save Button
The Save button is used to store a Mix Preset to either a channel button location (1 through 16) or one of
the four Instant Mix Recall locations (A, B, C, and D).
Save a Mix Preset to a Standard Location
To save a mix to one of the channel button locations:
Hold down the 1. S
AVe
button
The red LED in the Save button will blink. 2.
While still holding the 3. S
AVe
button, press one of the 16 standard channel buttons.
Release the 4. S
AVe
button.
As a confirmation, all 16 channel buttons will blink briefly. 5.
While holding the Save button, you can store a mix to multiple locations if desired. Each save action will
display the confirmation message (all 16 channel buttons blink briefly).
P t
ip
:
To determine which Mix Preset was last recalled or saved, hold the S
AVe
button. The preset
location’s LED will blink as a reminder. Release the Save button to return to the mix.