Checkline TI-CMXDL - Manual (Page 13)

Alternatively, the B-START and B-DEPTH values can be changed using the Digit Edit B
as follows:
1. Use the UP and DOWN arrow keys
to scroll through the sub menu items
until B-START or B-DEPTH is highlighted.
2. Press the ENTER key to display the digits edit box.
3. Press the UP and DOWN arrow keys to scroll the highlighted value.
4. Press the LEFT and RIGHT arrow keys
to scroll the digit locations.
5. Repeat steps 3 & 4 until the B-START
or B-DEPTH value is correctly
displayed.
6. Press the OK key to set the B-START
or B-DEPTH value and return to the
DISP menu, or ESC to cancel entering
the B-START or B-DEPTH value.
NOTE: The adjusted value will appear next to the B-START or B-DEPTH menu labels.
7. Finally, press the MEAS key to return to the measurement screen and begin taking
readings.
In the upper left corner of
each of the display photos
at the right, is the repeatability
indicator. The repeatability
indicator is represented by
six vertical bars and represents
how repeatable the measure-
ments are. In regular measure-
ment mode, the TI-CMXDL
makes eight measurements
a second. In scan mode, the
TI-CMXDL makes 200 meas-
urements a second. If the coating mode option is activated, the TI-CMXDL makes three
measurements a second in regular measurement mode and 65 measurements a second
in scan mode. When the TI-CMXDL is idle, only the left vertical bar and the underline w
be displayed. However, when the TI-CMXDL is making a measurement, five or six of th
bars should be displayed on the repeatability indicator. If fewer than five bars are showin
the TI-CMXDL is having difficulty achieving a stable measurement and the thickness va
displayed is potentially unstable.
-13-
2. The user may opt to clear a specific reading and save a new one at any time. Press the
CLR key in the appropriate cell location to clear the reading, take a new measurement,
and press the ENTER key to save the new reading.
3. Abort the Grid/Seq Log View Box by pressing the MEAS key at any time.
11.5 Deleting Grids (Files)
Deleting One File
1. Press the MENU key once to activate the menu items tab.
Press the MENU key multiple times to tab right and the
ESC key multiple times to tab left until the DATA menu is
highlighted and displaying the submenu items.
2. Use the UP and DOWN arrow keys to scroll through the
sub menu items until DELETE ONE FILE is highlighted.
3. Press the ENTER key to display the File List Box.
4. Use the UP and DOWN arrow keys to scroll through the
stored Files until the target File to delete is highlighted.
5. Press the OK key to delete the File.
6. Press the MEAS key to return to the measurement screen.
Deleting All Data
1. Press the MENU key once to activate the menu items tab.
Press the MENU key multiple times to tab right and the
ESC key multiple times to tab left until the DATA menu is
highlighted and displaying the submenu items.
2. Use the UP and DOWN arrow keys to scroll through the
sub menu items until DELETE ALL DATA is highlighted.
3. Press the ENTER key to activate the confirmation screen.
4. Press the OK key to delete All Files from memory, or the
ESC key to abort.
5. Press the MEAS key to return to the measurement screen.
-56-