Qos configuration menu, Network configuration – Cisco SERIES 7970 User Manual

Page 24

Advertising
background image

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Device Configuration Menu

4-24

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones

OL-8148-01

QoS Configuration Menu

The QoS Configuration menu displays information that relates to quality of
service (QoS) for the phone.

Table 4-11

describes the options on this menu.

Related Topics

Displaying a Configuration Menu, page 4-2

Network Configuration Menu, page 4-7

Network Configuration

The Network Configuration menu contains the Load Server option. The Load
Server option is used to optimize installation time for phone firmware upgrades.
You can set the Load Server to another TFTP server IP address or name (other
than the TFTP Server 1 or TFTP Server 2) from which the phone firmware can be
retrieved for upgrades on the phones. When the Load Server option is set, the
phone contacts the designated server for the firmware upgrade.

Security Mode

Displays the security mode that is set
for the phone.

Use Cisco Unified CallManager
Administration to modify.

Logging Display

For use by the Cisco Technical Assistance Center (TAC), if necessary.

Table 4-10

Security Configuration Menu Options (continued)

Option

Description

To Change

Table 4-11

QoS Configuration Menu Options

Option

Description

To Change

DSCP For Call
Control

Differentiated Services Code Point
(DSCP) IP classification for call
control signaling.

Use Cisco Unified CallManager
Administration to modify.

DSCP For
Configuration

DSCP IP classification for any phone
configuration transfer.

Use Cisco Unified CallManager
Administration to modify.

DSCP For
Services

DSCP IP classification for phone-based
services.

Use Cisco Unified CallManager
Administration to modify.

Advertising