Cub Cadet SLTX1000 Series - Manual (Page 132)

LTX Tractors
126
8. Disconnect the forward-neutral-reverse gear selec-
tor rod from the gear selector by rotating the rod 90
degrees. The coined ears on the rod will align with
notches in the selector, and the rod can be pulled-
free. See Figure 6.79.
9. Support the transaxle so that it can be lowered out
of the tractor in a controlled fashion.
10. Remove the torque bracket bolts using a 1/2”
wrench. See Figure 6.80.
11. Take the nuts off of the T-bolts that hold the tran-
saxle to the frame using a 1/2” wrench.
See Figure 6.81.
Figure 6.79
Figure 6.80
Torque bracket bolts
Figure 6.81
T-bolts