FRITSCH PULVERISETTE 6 classic line - Manual (Page 13)

2.5 Device safety information
n Only use original accessories and original spare parts. Failure to
observe this instruction can compromise the safety of the machine.
n Accident-proof conduct is to be strictly followed during all work.
n Comply with all currently applicable national and international acci-
dent prevention guidelines.
CAUTION!
Wear hearing protection!
If a noise level of 85 dB(A) is reached or exceeded, ear pro-
tection should be worn to prevent hearing damage.
WARNING!
The maximum accepted concentration (MAC) levels of the
relevant safety guidelines must be observed; if necessary,
ventilation must be provided or the machine must be oper-
ated under an extractor hood.
DANGER!
Explosion hazard!
– When grinding oxidizable substances, e.g. metals or
coal, there is a risk of spontaneous combustion (dust
explosion) if the share of fine particles exceeds a cer-
tain percentage. When grinding these kinds of sub-
stances, special safety measures must be taken and the
work must be supervised from a specialist.
– The high-speed rotor mill is not explosion protected
and is not designed to grind explosive materials.
n Do not remove the information signs.
NOTICE!
Immediately replace damaged or illegible information signs.
n Unauthorised alteration of the of the PULVERISETTE 6 will void Frit-
sch's declaration of conformity to European directives and void the
guarantee.
n Only use the of the PULVERISETTE 6 when it is in proper working
order, as intended and in a safety- and hazard-conscious manner
adhering to the operating manual. In particular, immediately rectify
any malfunctions that could pose a safety hazard.
n If, after reading the operating manual, there are still questions or
problems, please do not hesitate to contact our specialised per-
sonnel.
Please observe!
Safety information and use
- 13 -