FRITSCH PULVERISETTE 6 classic line - Manual (Page 15)

CAUTION!
The imbalance switch can be disabled at your own risk. The
Fritsch company will give no guarantee for damage
resulting from disabling of the imbalance switch!
NOTICE!
Change these settings only after all work as described in
Ä Chapter 4 ‘Installation’ on page 20 has been carried out!
In the default setting of the imbalance switch, it is acti‐
vated!
Activation / deactivation of the imbalance switch in Setup mode:
1.
Press and hold the STOP button on the front control panel.
2. Switch on the device with the main switch (10) on the back side of
the device, and release the STOP button.
Safety information and use
- 15 -