FRITSCH PULVERISETTE 14 - Manual (Page 14)

NOTICE!
Immediately replace damaged or illegible information signs.
n Unauthorised alteration of the of the PULVERISETTE 14 will void Frit-
sch's declaration of conformity to European directives and void the
guarantee.
n Only use the of the PULVERISETTE 14 when it is in proper working
order, as intended and in a safety- and hazard-conscious manner
adhering to the operating manual. In particular, immediately rectify
any malfunctions that could pose a safety hazard.
n If, after reading the operating manual, there are still questions or
problems, please do not hesitate to contact our specialised per-
sonnel.
2.6 Protective equipment
Protective equipment is to be used as intended and may not
be disabled or removed.
All protective equipment is to be regularly checked for
integrity and proper functioning.
For start-up, the housing cover (9) must be closed.
The housing cover is locked:
n without mains connection
n during operation
The housing cover (9) can only be opened, if the mill's drive
is at a standstill.
2.6.1 Opening the housing cover without voltage supply
CAUTION!
The emergency release must not be activated while the
machine is running! Disconnect the machine from the
mains before the emergency release. Failure to observe this
will render void the guarantee, and releases us from lia-
bility for any resulting damage to the device or personal
injury.
Safety information and use
- 14 -