FRITSCH PULVERISETTE 14 - Manual (Page 37)

For the article numbers, please refer to our homepage or the spare parts
catalogue.
Assembly instructions for the "frame" and "dust exhaust system with
cyclone separator" are supplied with the order.
1. Use a cross-head screwdriver to unscrew the cover plate on the
left side of the housing cover.
2. Remove the cover screws in the lower part of the housing.
3. Fasten the bent tube support there.
Conversion of the PULVERISETTE 14 for
use with the cyclone separator
Using the device
- 37 -