Hardy Advantage Weigh Modules LPB - Manual (Page 7)

OPERATION AND INSTALLATION MANUAL
Page 1
Congratulations, on your purchase of the Hardy Process Solutions
Load Point Assembly. This product, is engineered to set a new stan-
dard in load point assemblies. Hardy combined new innovations with
previously extra cost features and just plain common sense features
and provided you with optimum performance unequaled anywhere.
General Information The Hardy HI LPB Hermetic Load Point System is
designed to provide accurate output in the most
demanding applications. The load sensor performance
exceeds IP68 and NEMA 6 Standards for Wash Down
Resistance.
The HI LPB Free Sliding Load Point System is
designed for use on medium capacity vessels. The pre
assembled Free Sliding Load Point System consists of
three (3) different low profile mount types (See Figs.
1,2,3) specifically designed to eliminate the effects of
unwanted forces and resulting in exceptional load
measuring accuracy.
Each load point consists of a stainless steel load sen-
sor which is truly hermetically sealed (gauge area and
cable entry), Enhanced C2
®
Second Generation Cali-
bration, matched mV/V and mV/V/Ohm and a 1/4
inch conduit adapter. The load points are pre assem-
bled at our factory eliminating any assembly in the
field. Each load point is fitted with a grounding strap
and anti-lift off protection. The load points mounting
hardware is available in either stainless or galvanized
steel.