Inovonics FA464DR - Manual (Page 3)

© 1999 Inovonics Wireless Corporation 02039F.DOC LIT-FA464-INSTALL
3
hc:21-Nov-03
Features of the FA464DR include:
x Full supervision of up to 64 FA transmitters.
x The FA464DR has 16 Form C Alarm Output Relays, plus a global Fault Output Relay.
x Transmitter, receiver and output options are factory assigned. They may be changed with the FA116
Executive Programmer or with the FA104 (upgraded C104) programmer.
x Intelligent global fault output for tamper, low battery and inactive transmitters. For example, if one of
the alarm outputs is assigned to monitor low battery faults, the fault output automatically becomes
tamper and inactive only.
x Manual and/or electronic reset of the receiver.
x Factory default programming: "Alarm" and "Inactive" outputs are programmed to follow transmitter
status; "Tamper" and "Low battery" outputs are latching. Latched outputs require the receiver to be
reset.
x Simple restoral to factory defaults.
x Automatic exit from programming after 4 minutes of inactivity.
x Transmitter Status LEDs show transmitter activation, tamper, low battery and inactive.
x The Programming LED blinks when the point IS NOT programmed, is on steady when the point IS
programmed.