Technical specifications, Installation – Inovonics FA464DR User Manual
Page 4
© 1999 Inovonics Wireless Corporation 02039F.DOC LIT-FA464-INSTALL
4
hc:21-Nov-03
Technical Specifications:
Dimensions (housing):
11" x 8.5" x 1.75"
Weight:
34
oz
Environmental:
Operating
temperature:
32q-140qF (0q-60qC)
Relative Humidity:
90% (non-condensing)
Electrical:
Power Requirement:
12-17 VDC, 980mA
Minimum:
60
Ma
Output relay rating:
1A @ 28 VDC, 0.5A @ 30 VAC (resistive)
Wire gauge:
14-22 AWG
Receiver:
Type:
frequency-hopping spread spectrum
Operating frequency:
902-928 MHz
Installation:
Power: Supply power and ground to designated terminals on the Power Input terminals.
Note:
To power the FA464DR directly from an AC power source, Inovonics recommends a power supply that is
UL listed for use with “Burglar Alarm Systems.”
Mounting: Use supplied hardware to attach FA464DR housing to wall or surface.
RECEIVER COVER SCREW ACCESS
(2 PLACES)
WALL MOUNT SCREW ACCESS
(2 PLACES)
Figure 2