Kistler-Morse KM Weigh II - Manual (Page 18)

3-6
Chapter 3. Menu, Tree, Keyboard Functions, and Quick Start
Key Character Character
Shift LED On Shift LED Off
1 S T U 1
2 V W X 2
3 Y Z 3
4 J K L 4
5 M N O 5
6 P Q R 6
7 A B C 7
8 D E F 8
9 G H I 9
0 Space 0
. : .
- - -
Menu + * / @ % # & | a b c d e f g h
F1 () {} [] <> i j k l m n o p
F2 ! ^ $ x ‘ , ?; q r s t u v w x
F3 >< º & ! α σ y z , “ ‘ ! : ;
Auto/Man - o º Ц Ь и
Note: Additional characters (parentheses and
symbols) are available using the F1, F2, and F3 Keys,
the Auto/Man Key, the Up and Down Arrow Keys, and
the Tare/Net/Gross Key.
Table 3-1. List of Characters Available for
Customer-Defined ID
Key
The Key is used to back up the cursor on
the LCD display when using the alphanumeric
keypad.
Shift Key
The Shift LED, located below the Auto LED
on the faceplate, illuminates when the
Shift Key is on. The Shift Key has several
functions:
• The Shift Key is used in conjunction with
the Alphanumeric Keys. When the Shift
Key is on, the keypad types the letters
labeled above the Alphanumeric Key (see
Alphanumeric Keys below for information
on toggling between the letters). When the
Shift Key is off, the keypad types the
number labeled on the key. The Shift Key
is also used in conjunction with other keys
on the panel to provide additional alphanu-
meric characters.
• The Shift Key is also used in conjunction
with the Tare/Net/Gross Key.
Enter Key
The Enter Key has several functions:
• The Enter Key is used to save in memory
any parameter set up in the menus. For
example, if you enter a value in the Cal
Menu, pressing the Enter Key saves it to
memory. The value remains in memory
until a new value is entered.
• When typing in a vessel ID, the Enter Key
advances the cursor one space to the
right.
• When the Weigh II is displaying a numeri-
cal value for gross weight in the Manual
Mode, pressing the Enter Key toggles the
display from numerical format to bar graph
format. The display remains in the bar
graph format (even if the
Weigh II is turned off and back on again)
until the Enter Key is pressed to toggle
back to the numerical format.
“.” (Period) Key
When the Weigh II is vessel monitoring in the
Manual Mode, pressing the “.” Key briefly
displays the current Weigh II software revision
letter and the date of the release.
The “.” Key also functions as a decimal point
when entering numbers in the math channel.
Alphanumeric Keys
The Alphanumeric Keys are used to type in
numbers during setup and calibration.
When the Shift Key is on (Shift LED is
8