Kistler-Morse KM LD360s - Manual (Page 29)

Appendix D. Technical Drawings (TI)
Appendix D: Technical Drawings
D-1
This appendix contains the following technical drawings for the Load Disc:
Drawing No. Drawing Titile
TI-LC.LD360s-(revC) Installation Arrangements, 1K-25K, Load Disc 360s (14 Pages)
Installation Instructions Page 1-4
LD360s with Leveling Top Universal Adapter Plate 5
LD360s with Universal Top Adapter Plate 6
LD360s with Anyadapter Plate 7
Mounting hole patterns for Anyadapter 8
LD360s with Leveling Base Adapter Plate 9
LD360s Mounting Dimensions 10
LD360s Mounting to Floor and I-beam 11
LD360s with Gusset Leg Attachment on I-Beam 12
LD360s Cabling using Molded Junction Conn, J-Box 13
LD360s Conduit/Non-conduit Cable Layout 14
RF-LC.LD360s-(revA) Retrofit TI-DWG, 1K-25K, Load Disc 360s (1 Page)
LD360s/UA360 Retrofit from LDII/UA1
1
TI-LD360s-01(revB) LD360s Typical Cabling Diagram (1 Page) 1
TI-LD360s-FM-01 FM Approved Installation Drawings (3 Pages) 1-3
TI-LC.LD3-(revA) Installation Arrangements, 1K-25K, LD3 (14 Pages)
Installation Instructions
Page 1-4
LD3 with Leveling Top Universal Adapter Plate 5
LD3 with Universal Top Adapter Plate 6
LD3 with Anyadapter Plate 7
Mounting hole patterns for Anyadapter 8
LD3 with Leveling Base Adapter Plate 9
LD3 Mounting Dimensions 10
LD3 Mounting to Floor and I-beam 11
LD3 with Gusset Leg Attachment on I-Beam 12
LD3 Cabling using Molded Junction Conn, J-Box 13
LD3 Conduit/Non-conduit Cable Layout 14
RF-LC.LD3-(revA) Retrofit TI-DWG, 1K-25K, LD3 (1 Page) 1
TI-LC.LD3&LD360-01 Load Block to Load Disc Retrofit Installing (1 Page) 1