Kistler-Morse KM LD360s - Manual (Page 8)

Installation Option Descriptions
Universal Top Adapter Plate
This option consists of the Universal Top Adapter Plate, spring washer
and a hex head bolt. The adapter plate attaches to the load disc with the bolt
and washer. The adapter plate then bolts to a vessel gusset or a flat plate
welded to the vessel leg, using customer-supplied hardware.
This section will briefly describe the following hardware options
for the Load Disc:
Universal Top Plate Adapter, Leveling Top Plate Adapter,
Anyadapter Plate and Leveling Base Adapter Plate.
See Chapter 2 and 3 for more specific installation instructions and
refer to the TI drawings located in Appendix D.
Note: Accomodates up to three
degrees of tilt in the floor or
vessel legs.
Chapter 1: Description of the Load Disc
1-2